PJM Interconnection reached a preliminary all-time peak of 168,158 MW during the July 2026 heat wave and reported that service was not impacted, after the Energy Department issued an emergency order for the largest U.S. grid.
The order applied to a grid that ABC News said supplies about 65 million customers in Washington, D.C., and all or parts of 13 states. It took effect at 11:59 p.m. on Tuesday, June 30, and was set to run through 11:59 p.m. on Friday, July 3, according to the ABC News account.
The alert directed PJM to act to prevent blackouts and keep essential operations such as hospitals functioning, and it told the operator to conserve energy by curtailing power to data centers with backup generators and other non-emergency facilities that use large amounts of electricity.
On Nov. 10, ERCOT said subscribers to its Texas Advisory and Notification System could receive grid notices by text for the first time, in English or Spanish.
What the federal order did
At the time, extreme-temperature alerts covered 160 million people in 30 states, ABC News reported. Heat-index forecasts for the holiday week called for 100 degrees in Chicago and Detroit, 110 in New York City, 112 in Philadelphia, 113 in Washington, D.C., and 111 in Nashville. The National Weather Service said dangerous, record-breaking heat would continue across most of the central and eastern U.S. through Friday, Utility Dive reported.
Utility Dive reported that the Energy Department ordered PJM to maximize generation output and that the specified resources were all fossil-fuel plants, including units able to burn natural gas or fuel oil. PJM estimated it drew about 3.25 GW from units running beyond their environmental permit limits, according to its July 10 review.
PJM said both 202c emergency orders were effective July 1 and extended through July 6. Energy Secretary Chris Wright, in a statement, said: "Maintaining affordable, reliable, and secure power in the PJM service territory is non-negotiable."
The record, and the margin
PJM had forecast 166,304 MW for Thursday, July 2, which would have broken the 2006 record, ABC News reported. Its post-event review put the preliminary unrestricted peak — which adds estimated demand-response reductions back to measured load — at 168,158 MW between 5 and 6 p.m. that day, compared with 165,563 MW set on Aug. 2, 2006.
PJM said July 2 set its record for average regional air temperature at 97 degrees. Forced outages of generating units ranged from 18,100 MW to 19,400 MW from July 2 through July 4, above the 12,800 MW average for the top 10 summer peak days of the previous three years.
As demand approached its peak, some generators tripped offline and PJM called emergency demand response, which pays customers in advance for a commitment to cut electricity use during system emergencies. Preliminary demand-response performance was about 6,113 MW on July 2 and 5,037 MW on July 3.
The peak came close to PJM's 90/10 seasonal forecast of 169,128 MW, a 1-in-10 probability the operator plans for. Paul Dajewski, senior manager of dispatch, told the operator's Operating Committee that PJM used every generator available. "Our capacity position continues to be an area of concern," he said.
PJM issued a warning on the evening of July 2 that large customers in three zones — BGE, PEPCO and Dominion — should prepare to switch to backup generation within 15 minutes. The follow-on action was never issued, and PJM's July 3 update said service was not impacted.
Other grids that week
NYISO projected a Thursday peak of 32,410 MW. MISO, which covers 15 states, declared conservative operations on Tuesday, Utility Dive reported, and ABC News reported that MISO said it could break its own peak-demand record. ISO New England expected 25,850 MW around 7 p.m. Thursday, Utility Dive reported, below its record of 28,000 MW set on Aug. 2, 2006, according to ABC News.
Matthew Kakley, a spokesperson for ISO New England, said the region expected tight conditions and that widespread weather could limit assistance between neighboring systems, while adding that its operators had tools to keep supply and demand in balance. Ramanan Krishnamoorti, vice president of energy and innovation at the University of Houston, told ABC News that a heat wave in Canada could reduce the low-cost power New England imports.
AccuWeather said 167,000 outages were reported across the U.S. on Tuesday night, Utility Dive reported.
What customers were asked to do
PJM said its maximum generation and load management alerts did not require action from customers and were aimed at transmission and generation owners. Con Edison asked customers to limit use of multiple air conditioners and large appliances between 2 and 10 p.m. during the heat wave, Utility Dive reported.
Krishnamoorti said nighttime temperatures were expected to give little relief, which he said would stop grid operators from idling plants for routine maintenance. He also said some utilities might have to implement rolling blackouts in localized areas to ease pressure on the grid.
Reading the alert ladder
ERCOT's notice ladder runs from a Weather Watch and voluntary conservation notices through three Energy Emergency Alert levels. Level 1 is triggered by reserves under 2,500 MW that are unlikely to rebound within half an hour. Level 2 follows at under 2,000 MW, or if frequency holds under 59.91 Hz for 15 minutes. Level 3 begins at under 1,500 MW, or any drop under 59.8 Hz, and brings controlled outages across the system.
ERCOT's notices direct people with critical medical needs to check with their local electric utility, and the operator asks the public to conserve during specific periods if it is safe to do so. Since Nov. 10, TXANS subscribers can choose email, text or both, and messages go out in English and Spanish.
PJM said its demand-response programs pay participants in advance for agreeing to reduce electricity use during system emergencies, and the operator called on those resources on July 2 and July 3.
What the record leaves behind
The heat wave produced the highest peak PJM has served and its hottest average regional air temperature. The operator met it with demand response, every available generator and federal permission to run some units past environmental limits.
PJM's review said the system is tightening because new supply is not keeping pace with demand, and Dajewski called the capacity position a concern.
